Lynx LT-ADAT kartica

Tehnička specifikacija * Adds 16 Lightpipe I/O channels at up to 48 kHz to Aurora converters * Higher sample rates attainable via S/MUX technology * Easily installed into Aurora's LSlot bay * Controlled via Aurora front panel or by computer via AES16. * ADAT/AES-EBU bidirectional format converter * Flexible clocking options * FPGA core allows field upgraded of firmware * RoHS compliant Dodatne informacije Adds up to 16 ADAT Lightpipe I/O to Lynx Aurora 8 and 16 converters with a 48kHz sampling rate. The Lynx LT-ADAT Aurora card is an LSlot ADAT card specifically for Lynx's Aurora 8 and Aurora 16 converters (sold separately) that adds up to 16 channels of high-performance ADAT Lightpipe input and output. The LT-ADAT is a full-function ADAT interface that provides 2 ADAT Lightpipe inputs and 2 outputs. Operating at a sample rate of 48kHz, the Lynx LT-ADAT has 16 I/O channels. Higher sample rates are supported using S/MUX technology: 8 channels at 96kHz and 4 channels at 192kHz. Easily installed inside the Lynx Aurora 16 and Aurora 8, the LT-ADAT connects via ribbon cable to the host converter. Channel routing is controlled from the Aurora front panel or by computer via the Lynx AES16 PCI card. The LT-ADAT clock can be slaved to Aurora or a Lightpipe optical signal. Even when slaving to Lightpipe, Aurora's SynchroLock technology provides immunity to the high levels of jitter sometimes found in optical signals. Lynx LT-ADAT also allows Aurora to function as a bi-directional format converter, converting ADAT to AES/EBU and analog and back to ADAT.