RODE NTR Active Ribbon Microphone
SLIČNI PROIZVODI
The Ribbon
One of the thinnest ribbons in existence Measuring only 1.8 microns, the NTR ribbon was designed to provide the highest level of sensitivity across the useable frequency response range. Laser etched element Most ribbon microphone manufacturers manually cut the element, resulting in microscopic frays along the edges that decay over time. RODE uses a proprietary laser technique to cut the NTR ribbon, giving a far more precise cut with smooth edges, increasing its longevity. Internal shock mounting The NTR’s integrated shock mounting is so effective an external shock mount is not required.The Body
Travel screw This secures the sensitive ribbon element and shock mount in place when not in use. Chemically etched all-metal mesh Extremely rigid while exhibiting super-low density, this results in greater acoustic transparency. Solid surfaces in the capsule rejection zone The solid frame around the ribbon capsule is positioned entirely within the rejection zone of the capsule’s bidirectional polar pattern. Unique design The ribbon is mounted distinctly separate to the microphone body, allowing the greatest possible acoustic transparency around the ribbon element and minimizing any resonance.The Electronics
Custom transformer Married to RODE’s ribbon element is a high output, ultra-low noise, low-impedance transformer. This ensures maximum fidelity between the NTR’s ribbon motor and electronics. World-class active electronics In combination with the transformer this allows the NTR to be used with a wide range of preamps without the additional gain requirements of many other ribbon offeringsThe Warranty
10 year warranty RODE offers a free extended 10 year warranty on the NTR, following online registration of the microphone on www.rode.comFeatures
Highly sensitive 1.8 micron ribbon element
Bi-Directional Polar Pattern
Internal Shock Mounting System
Custom designed and manufactured transformer
Heavy-duty matte black finish
Ribbon-securing travel screw supplied
Designed and manufactured in Australia
One free ribbon replacement during warranty period
Specifications
Acoustic Principle: Velocity transducer
Active Electronics: Step-up Transformer and signal balanced preamp stage
Directional Pattern: Figure 8
Frequency Range: 20Hz ~20000 Hz
Output Impedance: 200 Ohm
Signal to noise Ratio: 79.3dBA
Equivalent Noise: 15 dbA SPL (as per IEC651)
Maximum SPL: 130dB SPL
Maximum Output: 8dBu (@ 1KHz, 1% THD into 1K ‡ load)
Sensitivity: -30.5 dB re 1V/Pa (30mV @ 94dB SPL) ± 2dB @ 1kHz
Dynamic Range: 115dB SPL
Power Requirements: P48
Output Connection: 3 Pin XLR - Balanced output between Pin 2 (+) Pin 3 (-) and Pin 1 (ground)
Weight: 1047g
