Audio-Technica ATM710
Kretanje cena
LOKACIJE PRODAVNICA
ELEMENT Fixed-charge back plate permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 40-20,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave OPEN... Pročitaj ceo opis
22.200,00 DIN
Proizvođač
Cuin
Idealno.rs Unique Identification Number
CX00543EBA
Prijavi grešku
SLIČNI PROIZVODI
ELEMENT Fixed-charge back plate permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 40-20,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY –40 dB (10.0 mV) re 1V at 1 Pa IMPEDANCE 200 ohms MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical) 127 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 73 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 3.5 mA typical SWITCHES Flat, roll-off; 10 dB pad WEIGHT 274 g (9.7 oz) DIMENSIONS 179.0 mm (7.05") long, 50.0 mm (1.97") diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8470 Quiet-Flexâ„c stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE T6
The new Artist Series vocal condenser microphone is tailored for exacting detail and high-fidelity vocal reproduction. With a condenser design for studio-quality performance, the ATM710 delivers remarkable clarity. The microphone is equipped with an integral 80 Hz hi-pass filter that provides easy switching from a flat frequency response to a low-end roll-off position that reduces the microphone's sensitivity to popping in close vocal use. The ATM710 is also equipped with a switchable 10 dB pad that lowers the microphone's sensitivity, providing higher SPL capability. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. * Excels in venues with controlled stage volume or in-ear monitoring * Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source * Superior anti-shock engineering for low handling noise * Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity * Condenser design for studio-quality performance * Integral 80 Hz HPF switch and 10 dB pad * Corrosion-resistant contacts from gold-plated XLRM-type connector * Rugged, all-metal design and construction for years of trouble-free use
